Pro Cable Software

1. Cable Pro Tool
2. Pro Cable Software Free
3. Pro Cable Software Download
4. Pro Cable Software Developer

From The RadioReference Wiki

Which Software Should I use with my scanner?

JackAudio is a virtual audio software cable that run on Windows Linux and MacOS and if Free to download and to use. Virtual Audio Capture Device This software is a free windows audio capture driver that allow you to capture all the wave-out-sound that is playing on your speakers, and will record what you hear. Cable Pro has grown through our office, beginning with our estimation department, with now all our project managers, estimators and site supervisors using it on a weekly basis. Cable Pro saves huge amounts of time identifying cable sizes, and conduit sizing as required.

The following chart is an up to date version of all RS model numbers and the BuTel package that supports it. Note that in some cases, GRE and Whistler had equivalent models, and these are also cross referenced here. Also note that before RS withdrew from the scanner market, they reissued some of their scanners with new model numbers.

Silhouettefx silhouette 7 5 8 x 9.

Compatibility

Cable Pro Tool

The software is Windows Vista/7/8/10 compatible (both 32 and 64 bit versions). MAC OS is not supported.

Installation and Use

See this PDF document tutorial which walks the user through the download, installation, and initial programming process.

Scanner Master also has a helpful page with information on installing and using the Radio Shack Programming Software

ARC500 software User Guide

USB Cable Driver Installation

See this PDF document which walks the user through the driver installation for the cable

You can also install the driver from the Radioshack Software. Start the Radioshack software selection panel and then press the yellow 'Install USB Driver'.

Registering Your Software

After purchasing your software, you should receive your license keys via email at the address you registered with. Follow these steps to register your software.

• Click START > PROGRAMS > SCANNER SOFTWARE > [Your Scanner Model]. This will start the software.
• Confirm the demo message and then choose the menu item HELP > REGISTER.
• Enter both keys ( Key1 and Key2) you received via email and click OK.
• The keys are case sensitive and must be entered with the dashes. You must type in the keys, do not use copy/paste.
• Close the software and then restart by following the first step in this list.
• Your software should now be registered

Please note that the keys are case sensitive and must be entered with the dashes.

Common Questions and Issues

• Help my key does not work?

All software license keys sold at www.radioreference.com/radioshack/ are tested and verified and work. Most common errors are:

• Entering key in incorrect software. Each different software requires a different key.
• ARC500 key sold here is for ARC500BASIC and will not work in ARC500PRO. License keys for ARC500PRO can be purchased at www.butel.nl
• The license key is case sensitive and must be entered exactly as shown with the dashes

• I am receiving a 'Nothing Enabled Error' after programming my radio

Sims 4 macbook pro 2016. If you imported info into ARC500 and/or uploaded programming to your scanner and you receive the message 'Nothing Enabled' on your radio, you need to assign the frequencies or talkgroups to a 'scanlist'. This can be done easily in the software by going to the scanlist column next to the alpha tag column, in either Coventional or Talkgroup under Scannable Objects, and typing in the scanlist number. When each frequency and/or talkgroup has been assigned a scanlist you can then proceed with uploading the information to the scanner.

• No data is transferred to my scanner.

First make sure you plugged the USB cable in the PC/IF jack and not the headphone jack. Also verify that the led's on the USB cable are flashing during the data transfer.If they are not flashing you selected the incorrect usb/com port and/or the driver is not installed correctly. Re-install the USB driver. Also try a different USB port.

• I am receiving a 'Init not ok. Can't read user data' message when trying to import data from the database

This message usually indicates that a firewall is blocking the software to access the internet. Add the ARC software to the safelist of your firewall software.You may also see this message on satellite internet connections due to the latency on those networks. The webimport may not work on satellite internet, use dialup or cable/DSL instead. 'Hughesnet' users must disable the Turbopage option.

• I lost my software registration.

If you purchased the software license using this website then simply logon to your Radioreference account at www.radioreference.com and then locate the Licenses section. This shows all software license details that were purchased. You can also use this link: http://www.radioreference.com/apps/account/?tab=3Dlicenses

Screenshot

Contact

If you need support via email, please contact the Radio Shack Scanner Programming Support Team at:

Addititional information is available at 800SCANNER resources

MakaiPlan Pro uses a rigorous and thoroughly validated 3D dynamic model of the cable in its simulations. This same cable model also powers the MakaiLay software, which has been used to accurately install more than 500,000 km of subsea cable.

Preliminary Ship Plan

MakaiPlan Pro has the tools to generate a preliminary ship plan: a detailed set of ship and cable payout instructions for installing the cable along a given submarine cable route. The Ship Plan is similar to a Route Position List (RPL) except that it is surface oriented and defines ship movements and cable payout instructions. MakaiPlan Pro can generate a preliminary Ship Plan quickly and automatically based on simple steady-state approximations to the cable installation process. This provides a first-cut at a Ship Plan, which is then refined and improved based on detailed dynamic simulation results.

Cable Simulations

MakaiPlan Pro includes a state-of-the-art cable installation model that can quickly and accurately compute the cable shape and movement during a submarine cable lay. MakaiPlan Pro's cable model computes the complex, three-dimensional, dynamic shape of the cable between the ship and the touchdown under nearly any sequence of ship movements and cable payout. The model also takes into account cable type changes and inline cable bodies as well as changing bottom bathymetry and ocean currents. Makai's model has been rigorously tested and calibrated at-sea. As a result, the cable touchdown conditions – location, slack/tension and even bottom dragging – can be computed accurately. During a simulation, MakaiPlan Pro allows users to fully visualize the dynamic installation process in 3D and provides detailed numerical output of all the relevant parameters affecting the lay.

A screenshot of MakaiPlan Pro, showing the Plan View (top left), the Profile View (bottom left), the 3D Viewer (right), Lay Summary (far right) along with other controls and information about the simulated lay in progress.

Refining the Installation & Ship Plan

With MakaiPlan Pro, the cable installation can be simulated in detail and refinements can be made to the preliminary Ship Plan. With the aid of a dynamic 3D simulation of the lay, operators can look at the entire installation, minute-by-minute, and observe the slack or tension at the seabed, and the position of the cable along all portions of the route. This analysis can be accomplished at up to 50 times faster than real time. Every single event during installation (repeater touchdowns, alter-courses, splices, slowdowns and stops, etc.) can be graphically and numerically reviewed. Adjustments can be incorporated into the Ship Plan to compensate for these dynamic events and make sure the cable is properly installed as specified by the Route Position List.
MakaiPlan Pro includes a feature called Look Ahead, which enables the operators to look into the future and determine the impact on the cable lay for a given set of actions. This allows operators to quickly test 'what if' scenarios and decide on the best plan forward. This tool is very useful for in-office simulations to properly modify and optimize the ship plan, and is also a critical tool for resolving unexpected situations at-sea. With MakaiPlan Pro, users can make all the mistakes in advance on the simulator when they can be easily corrected and before they become costly at-sea disasters.

Feasibility Studies

Simulations produced by MakaiPlan Pro can be used to determine the feasibility of the given cable installation, taking into account ship and other equipment limitations as well as the expected environmental conditions. Simulations can be run to include typical at-sea instrument and operator errors. Instruments errors such as GPS position errors, cable length measurement errors and errors in the knowledge of the ocean currents and bathymetry can be easily incorporated in the simulations. Operator errors, such as how well the helmsman and cable engine operators can follow the instructions, can also be incorporated in the simulation. Using these results, an error budget analysis can be produced which will aid in determining the factors that are limiting the operation.
These computer simulations realistically reproduce actual at-sea lay conditions and allow the planner to estimate the probability of success to achieve the desired cable touchdown positions and the cable slack (or tension) at the seabed.

Equipment Selection

MakaiPlan Pro simulations can be used to quantify the effect of each instrument on the cable lay speed and accuracy. Makai can simulate DP systems, GPS, cable engines, Acoustic Doppler Current Profilers (ADCP – to measure ocean currents in real-time), and the use of transponders attached to the cable. MakaiPlan Pro can assist operators in objectively answering questions such as:

• Will a more expensive ADCP with longer range meaningfully improve my installation accuracy?
• Do I need to use transponders attached to the cable to meet the required installation accuracy?
• How does the installation speed affect my placement accuracy?
• Do I need a DP vessel?

Answering these questions allows the operator to present the client with a trade-off analysis of equipment costs vs. accuracy achieved and risk minimization. This analysis is objective and backed up by rigorous modeling results, making it much easier to convince project management of the need for having the right equipment on board. Open up macbook pro.

Pro Cable Software Free

Using Ocean Currents

Clean up my mac app. MakaiPlan Pro can generate and use time varying and depth varying current profiles in the simulated installation/retrieval runs to accurately represent the ocean currents you would expect at the site. The user can then evaluate how these currents would affect the accuracy for the placement of the OBC sensors as well as their effect on the tensions and cable dragging during retrieval. With these results, the user can evaluate whether the use of an Acoustic Doppler Current Profiler (ADCP) is warranted during the installation in order to achieve the desired accuracies.

Cable Engineer Training

Pro Cable Software Download

MakaiPlan Pro is very similar in operation to MakaiLay – Makai's at-sea cable monitoring, logging, navigating and controlling software. Operators can run entire cable installations prior to going to sea in order to become familiar with the software, cable installation concepts, and the details of a particular lay. This training prepares them to run successful at-sea lay operations.

Post Installation Analysis

MakaiPlan Pro can be used to simulate in detail a cable installation after the installation has been completed using the installation logs. As-laid cable paths can be refined and potential seabed problems can be identified. Post installation analysis is valuable in analyzing at-sea problems that might have occurred, identifying possible premature failure locations, and creating a good as-laid record of the installation.

Pro Cable Software Developer

Route Engineering

As with all of Makai's cable software, MakaiPlan Pro is built on a Windows GIS platform. This enables a precise placement of the cable on the seafloor, as well as the ability to import other GIS data such as cable databases, marine protected areas, and more. MakaiPlan Pro contains all the route planning and engineering goals of MakaiPlan and enables users to collaboratively design a cable path with cable engineers, owners, surveyors, and installers, all sharing a unified view of the project data. See Makai's brochure on MakaiPlan for more details.